Environmentally compatible, synthetic high-performance gear oils Klüberbio EG 2 oils are ultimately biodegradable gear oils based on synthetic ester oil. They contain ≥90 % of renewable raw materials. Klüberbio EG 2 oils show a high shear stability and form a strong hydrodydamic oil film even when subject to high loads. They have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads. Klüberbio EG 2 oils achieve the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant (EAL). Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and non-bioaccumulating standards set in Appendix A of the U.S. EPA's 2013 VGP (Vessel General Permit). Klüberbio EG 2-150 also complies with the European Ecolabel. read more

CRC Smoke Test conveniently tests the functional ability of a smoke detector. CRC Smoke Test can be sprayed while standing on the floor eliminating the need to climb ladders or chairs. CRC Smoke Test is ideal for residential or commercial detectors and is safe and easy to use. A short 3 second burst of CRC Smoke Test is all it takes. In addition, CRC Smoke checks for obstructions or debris which clog detector vents and prevent smoke from properly entering the sensing chamber. This important safety test is not accomplished by pushing a test button. APPLICATIONS Recommended to test the functional ability of commercial or residential smoke detectors. FEATURES/BENEFITS: Simulates smoke, provides a true, functional test for smoke detectors. Aerosol spray extends user reach up to 1m allowing testing to be done while standing safely on the floor. Convenient package makes testing easy.   read more

Transparent Protective Conformal Coating for PC Boards and Electronic Components. PLASTIK is based on an acrylic resin particularly suitable for electronics. lt forms a shiny, flexible and protective film, that is resistant to acids, salt, fungus, corrosive vapours, thermal stress, mechanical abuse, alkalis, alcohol, moisture, and tough environmental conditions. lt retains its effectiveness within a wide range of temperatures from -70°C to +120°C. PLASTIK adheres to various materials such as metal, plastics, wood, cardboard, glass, etc. lt does not drip and permits soldering through its own layer. PLASTIK conforms with t MIL-I-460580 C „Type Acrylic Resin''. read more

White operating and priming lubricants Klüberplex AG 11-461 and 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components. These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill. read more

Synthetic lubricating grease for the food and pharmaceutical processing industry Klübersynth UH1 14-1600 ==>  a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. Klübersynth UH1 14-1600, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. The use of this lubricant needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear. read more

Aerochem Industries Sdn Bhd is a company that engaged in the marketing, sale and distribution of adhesives, chemicals, coatings, epoxy composites and lubricants. Our main office is located in Taman Mount Austin, Johor Bahru (JB). In 2000, Aerochem Industries Sdn Bhd has become the authorized LOCTITE distributor  for Loctite engineering adhesives, Maintenance, Repair and Overhaul (MRO) products. Besides, Aerochem Industries Sdn Bhd also distributes industrial lubricants, greases and metalworking fluids from Idemitsu. Vision and Mission Our goal is to provide our customers with prompt & effective solution. We strive to bring value to our customers by providing them the most convenient way to source after sale service, and at a competitive price. read more

OIL & GAS PRODUCTION COMPOUND - LEAD BASED DESCRIPTION BESTOLIFE® 72733 is a high pressure, high temperature thread compound for casing, tubing, and line pipe that exceeds API RP 5A3. It includes a special corrosion inhibitor for superior corrosion resistance as compared to API Modified. APPLICATIONS High-pressure thread compound for casing, tubing, and line pipe. PRODUCT CHARACTERISTICS Color: Dark Copper Penetration: 310-340 (ASTM D 217) Weight/Gallon: 15.8 pounds/gallon Dropping Point: ≥350°F/≥177°C (typ) Flash Point: 325°F/162.8°C (min) Brushable To: 0°F/-18°C Friction Factor: 1.0 Salt Spray: 900 Hours Shelf Life: 4 years (unopened container) Contains: Graphite, lead, zinc, copper read more

BIRKOSIT Sealing compounds used to join metallic elements in industry are subject to extreme demands due to the high temperatures and/or high pressure. read more

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology Klübersynth UH1 6 is a synthetic high-performance gear oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. Klübersynth UH1 6 includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components. Klübersynth UH1 6 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 6 oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP. Klübersynth UH1 6 is certified according to ISO 21469, thus supporting compliance with hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com. Klübersynth UH1 6 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth UH1 6 without prior consultation with the gear manufacturer provided the general application notes are observed. Klübersynth UH1 6 offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage. Klübersynth UH1 6 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are resistant to Klübersynth UH1 6. Leakage and oil contamination are prevented. The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications. The optimised friction behaviour enabled by the carefully selected base oils based on polyglycol reduces power loss and improves gear efficiency, especially in worm gears. Due to the optimised additives, wear values are reduced and a very low wear intensity according to DIN 3996 (calculation of load capacity of worm gears) is achieved. Klübersynth UH1 6 is approved by Siemens-Flender, Siemens Geared Motors, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Baldor, Boston Gear, Bonfiglioli, Watt Drive, etc. read more