Mobil Velocite™ Oil Numbered Series oils are premium performance products primarily designed for the lubrication of high-speed spindles in machine tools. They are also used in some critical hydraulic, circulation systems and air line oilers where the appropriate viscosity grade is selected. They are formulated from select high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water. read more

Mobil Vactra Oil Numbered Series products are recommended for the lubrication of machine tool slideway systems. They are designed for use with combinations of cast iron, steel and non-metallic way materials. Mobil Vactra Oil Numbered Series may be applied by hand, forced-feed lubricator or in flood application by circulation system.       •  Mobil Vactra Oil No. Series of products are suitable for use in applications that require Fives Cincinnati specifications P53, P47, and P50.      •  Mobil Vactra Oil No. 1 and No. 2 are recommended for horizontal slideways on small to medium size machine tools. They are also suitable for circulating application in large machines and as a moderate duty hydraulic fluid.      •  Mobil Vactra Oil No. 3 and No. 4 are normally recommended for large machines where way pressures are high and good precision is required. They are also recommended for vertical and inclined slideways where drain-down can be a problem and for moderate service machine tool gear drive mechanisms. read more

Features and Benefits Mobil DTE Named oils enjoy an excellent reputation in the lubrication of the circulation systems of steam turbines and hydro turbines, including geared turbines, plus a wide variety of ancillary equipment. As designs change and increase in severity, it is the challenge of our formulation scientists to understand the effect of these changes on the lubricant and to formulate these products for the broad versatility they are recognised for. Applications The Mobil DTE Oil Named Series of lubricants are premium performance circulating lubricants designed for applications where long lubricant service life is required. Specific applications include:      •  Land-based and marine steam turbine, hydro turbine and some gas turbine circulation systems, including pumps, valves and other ancillary equipment      •  Continuous service in plain and roller bearings and parallel shaft gearing      •  Turbines with oil supplied by splash, bath, ring oiling or other mechanical means      •  Moderate severity hydraulic pumps      •  Compressors and vacuum pumps handling air, natural gas, and inert gases, and with discharge temperatures not exceeding 150C   read more

Devcon® 11410 Wear Resistant Putty (WR-2) Description Smooth, non-rusting, all-purpose epoxy putty for repairs requiring low-friction finishes, such as machine lathe beds. Key Features Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plastics Contains wear-resistant fillers for low friction applications Also available in liquid form Listed under NSN stock #8030-00-229-8735; #8030-00-229-8736 Open Time: 45 Minutes Gap Fill: .0625″ – .075″ read more

Devcon® Brushable Ceramic Blue Description Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack. Key Features Temperature range up to 350°F 3 colors (red blue white) to insure uniform coating White is NSF-certified for use in potable water applications Low-friction surface reduces turbulence, wear, and cavitation Red and white formulas are acceptable for use in meat and poultry plants Outstanding chemical resistance to acids, solvents, and alkalis Open Time: 40 Minutes Gap Fill: .0625″ – .075″ Color: Blue Cure Time: 16 read more

  STEAMSEAL Foliac high pressure pipe sealant with graphite and manganese Excellent temperature range from -20°C to +600°C. Resist pressures of up to 193 bar (2800 psi). Joints sealed are easy to break and clean. Sets hard but is flexible enough to resist vibration, thermal expansion and contraction of pipework. Compatible with foam forming leak testers such as ROCOL Leak Detector Spray. read more

chemical additive that reduces and hinders the formation of foam in industrial process liquids and wastewater treatment read more

We are pleased to announce that we will be having our new office premises: (W.E.F. 15.9.2022) 28, JALAN MUTIARA EMAS 5/27, TAMAN MOUNT AUSTIN, 81100 JOHOR BAHRU, JOHOR, MALAYSIA. Tel:   07-364 5908 Fax:  07-350 3010 H/P:  019-853 2209 Email:    info@aerochem.com.my                      aerochem.genuineloctite@gmail.com read more