Features and Benefits Mobil DTE Named oils enjoy an excellent reputation in the lubrication of the circulation systems of steam turbines and hydro turbines, including geared turbines, plus a wide variety of ancillary equipment. As designs change and increase in severity, it is the challenge of our formulation scientists to understand the effect of these changes on the lubricant and to formulate these products for the broad versatility they are recognised for. Applications The Mobil DTE Oil Named Series of lubricants are premium performance circulating lubricants designed for applications where long lubricant service life is required. Specific applications include:      •  Land-based and marine steam turbine, hydro turbine and some gas turbine circulation systems, including pumps, valves and other ancillary equipment      •  Continuous service in plain and roller bearings and parallel shaft gearing      •  Turbines with oil supplied by splash, bath, ring oiling or other mechanical means      •  Moderate severity hydraulic pumps      •  Compressors and vacuum pumps handling air, natural gas, and inert gases, and with discharge temperatures not exceeding 150C   read more

Devcon® 11410 Wear Resistant Putty (WR-2) Description Smooth, non-rusting, all-purpose epoxy putty for repairs requiring low-friction finishes, such as machine lathe beds. Key Features Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plastics Contains wear-resistant fillers for low friction applications Also available in liquid form Listed under NSN stock #8030-00-229-8735; #8030-00-229-8736 Open Time: 45 Minutes Gap Fill: .0625″ – .075″ read more

Devcon® Brushable Ceramic Blue Description Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack. Key Features Temperature range up to 350°F 3 colors (red blue white) to insure uniform coating White is NSF-certified for use in potable water applications Low-friction surface reduces turbulence, wear, and cavitation Red and white formulas are acceptable for use in meat and poultry plants Outstanding chemical resistance to acids, solvents, and alkalis Open Time: 40 Minutes Gap Fill: .0625″ – .075″ Color: Blue Cure Time: 16 read more

  STEAMSEAL Foliac high pressure pipe sealant with graphite and manganese Excellent temperature range from -20°C to +600°C. Resist pressures of up to 193 bar (2800 psi). Joints sealed are easy to break and clean. Sets hard but is flexible enough to resist vibration, thermal expansion and contraction of pipework. Compatible with foam forming leak testers such as ROCOL Leak Detector Spray. read more

chemical additive that reduces and hinders the formation of foam in industrial process liquids and wastewater treatment read more

We are pleased to announce that we will be having our new office premises: (W.E.F. 15.9.2022) 28, JALAN MUTIARA EMAS 5/27, TAMAN MOUNT AUSTIN, 81100 JOHOR BAHRU, JOHOR, MALAYSIA. Tel:   07-364 5908 Fax:  07-350 3010 H/P:  019-853 2209 Email:    info@aerochem.com.my                      aerochem.genuineloctite@gmail.com read more

CORDOBOND STRONG BACK HEAVY DUTY Description Cordobond Heavy Duty is comparable to Cordobond Standard, but is reinforced with carborundum for extra heavy use and repairs. Use Cordobond Heavy Duty can be used during each phase in the naval and processing industry. In combination with glass cloth or tyre it can be used for lamination, reinforcement and repairs. Cordobond Heavy Duty is resistant to water, oil, alcohol, most acids and bases and all types of pollution. Cordobond Heavy Duty adheres excellently to almost all substrates, such as steel, wood, glass ceramics and synthetic materials, with the exception of P.P. (Polypropylene) and P.E. (Polyethylene). Cordobond Heavy Duty does not conduct electricity, is not magnetic, it is corrosion proof and resistant to temperature changes. Composition Cordobond Heavy duty consists of three components, Resin and Activator and carborundum, each packaged separately. The Resin tin is partially filled so that the Activator can be added and mixed together. During mixing it is important to add small portions of carborundum. read more

DEVCON 5 MINUTE EPOXY 14250 DESCRIPTION A rapid-curing, general-purpose adhesive / encapsulant. It forms a hard, rigid bond or coating in minutes FEATURES • 100% reactive, no solvents • Good dielectric strength • Good solvent resistance RECOMMENDED APPLICATIONS • Cures fast for quick metal to metal bonding and repairs • Pots and encapsulates electronic components and assemblies • Suitable for bonding metals, fabrics, ceramics, glass, wood and concrete (in combinations) read more

Solvent 3040 WHITE SPIRIT ==>  a l aliphatic fluid solvent used in industrial, professional and consumer applications: *fuel additives *paints *coatings *industrial cleaning chemicals *process fluids.  read more

CENTOPLEX GLP 500 Fluid multipurpose grease for long-term lubrication Benefits for your application – Multipurpose grease for long-term lubrication – High pressure absorption capacity – Applicable through central lubrication systems, especially single-line lubrication systems Description CENTOPLEX GLP 500 is a fluid multipurpose grease for the long- term lubrication at normal temperatures and high loads. Application CENTOPLEX GLP 500 was especially designed for friction points subject to high loads, e.g. rolling bearings, plain bearings, guides, threaded spindles and other highly stressed machine elements. This universal lubricating grease is used for the lubrication of highly loaded, oil-tight spur and bevel gears (e.g. gear motors, small gears), worm gears with steel/steel material combinations and denture clutches. CENTOPLEX GLP 500 is also suitable for the lubrication of linear guides, e.g. in machine tools, as well as in assembly and conveyor systems equipped with central lubrication installations read more