WEICON DF 175 ==> a patented thread sealing cord made of 100% PTFE that seals almost all metal and plastic threads permanently and safely. WEICON DF 175 reliably compensates the intermediate space on the threads and creates a PTFE film in the required thickness during the screwing procedure. This film is extremely resistant to almost all chemicals, even the most aggressive solvents, caustic agents, and acids. WEICON DF 175 is non-flammable and operates reliably in a temperature range from -200°C (-328°F) to +240°C (+464°F). In contrast to other sealing materials, for which the fabric solely acts as a base for the actual sealant, WEICON DF 175 itself is the sealing material. A separation of the base material and the sealing material over the service life of the screw connection is thus excluded. read more

WEICON Zinc Spray ==> approved by the German TÜV and provides a long-lasting cathodic corrosion protection to all metal surfaces. The spray forms a fast-drying, adherent protective layer of microfine zinc flakes. In the salt spray test according to DIN EN ISO 9227, metal parts coated with WEICON Zinc Spray did not show any signs of corrosion after more than 1050 hours. The zinc flakes form a resistant protective layer, even under extreme weather and environmental conditions. Zinc Spray thus fulfils higher requirements than those defined by the DIN EN ISO 1461 standard. WEICON Zinc Spray can be used as a high-grade anti-rust primer, for the coating of welded joints and drilled holes, as a conductive intermediate layer for spot welding and wherever metal must be protected against corrosion. read more

Klüber Summit FG Elite 46 Article-No: 050136Fully synthetic compressor oils for the food-processing and pharmaceutical industries Klüber Summit FG Elite series compressor oils were especially developed for the food-processing and pharmaceutical industries. It clearly outperforms conventional food-grade compressor oils. Its high-quality base oils and special additive package tuned to the requirements of air compressors offer excellent oxidation stability. Due to the innovative product concept, the formation of oil-related residues is reduced and and oxidative deposits or sludge build-up minimised. These benefits enable longer oil change intervals and service life of oil filters and separators. The product is miscible with mineral oils and other synthetic hydrocarbon oils. It is registered as NSF H1 and therefore complies with FDA 21 CFR 178.3570. Klüber Summit FG Elite series was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit FG Elite can contribute to increased reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP. read more

Klüberlectric KR 44-402 Article-No: 091021Special grease for the lubrication of electrical switches, contacts and sensors Klüberlectric KR 44-402 is a special grease for the lubrication of electrical switches, contacts and sensors. It consists of a synthetic hydrocarbon oil and lithium complex soap incorporating a UV indicator for quality inspection when locally applied in small quantities. A special additive combination makes Klüberlectric KR 44-402 particularly suitable for the lubrication of electrical contacts. It is intended especially for the protection and lubrication of copper, tin and silver surfaces against corrosion. Further positive effects are: reduction of plug-in and switching forces, reduction of fretting corrosion, extended connecting and switching cycles, constantly low contact resistance and smoother switching transitions. read more

PP WIND-BALL SCRUBBER TOWER INTERNAL ( PACKING MEDIA )   APPLICATION:   TOWER PACKING MEDIA  IN  PACKED BED SCRUBBERS  -- TO REMOVE ACIDS,  SOLUBLE GASSES, CHEMICAL FUMES, AND ODORS -- FOR USES IN INDUSTRIAL WET SCRUBBERS AND BIOGAS SCRUBBER TOWERS     FEATURES:   - HOLLOW PLASTIC BALL - LIGHT WEIGHT - HIGH  MECHANICAL STRENGTH - UNIFORM PACKING ORIENTATION - HIGH SURFACE AREA - ECONOMICAL - HIGH POLLUTANT GAS SCRUBBING EFFICIENCY - LARGE GAS THROUGHPUT HANDLING read more

DESCRIPTION: Lowers friction, prevents galling and helps to reduce torque and energy consumption. High anti-friction and anti-seizure properties. Fast drying film resists dirt and dust build-up. APPLICATIONS: Gaskets Transfer belts Conveyor belts Motors Plant machinery Handling equipment Rubber moldings High temperature Low load High RPM slides Rollers Wheels Gears Chains Hoists read more

CRC Red Urethane Seal Coat  (2044E) ==> a single component polyurethane coating that dries fast and forms a hard and flexible non-conductive film. Protects electric motors and armature windings. read more

CRC Belt Grip  ==>  a synthetic polymer based formulation specially developed to meet the demand for a true industrial and automotive food grade belt dressing. It adheres strongly to any commonly used belt material and forms a tacky, non drying, water resistant film that extends belt life by improving traction and reducing belt tension, slipping and dirt build-up. Belts remain pliable and will not glaze or harden while squeaking noise will be reduced. CRC Belt Grip is designed to be used on leather, rubber, canvas or fabric and is ideally suited for flat, round and V-belts. Not suited for use on multi-V-belts. Features & Benefits Tacky, non drying, water resistant film – Minimises drive belt slippage, resists water wash off, maintains belt flexibility and prevents loads from slipping on conveyor systems Improves traction and reduces belt tension – Relieving stress on motors, shafts and wheels for improved operating efficiency and extended belt life Colourless – Will not stain finished goods transported on conveyor systems Suitable for most belts and belt material – Flat, round or V belts. Leather, rubber, canvas or fabric Not suitable for multi-V-belts Indoor and outdoor use – Even in difficult hot and/or humid conditions No known ozone depleting chemicals MPI Approved C12 Includes Permastraw™ Dual-Action Spray System - One piece actuator with two-way spray that ensures that straw stays in place Uses Recommended for use in industrial machinery, conveyor systems, portable motorised equipment and vehicle belts Compressors, pumps, generators, fans, motors, automobiles, lift trucks Designed to be used on leather, rubber, canvas or fabric and is ideally suited for flat, round and V-belts. Not suited for use on multi-V-belts. read more