Aerochem Industries Sdn Bhd added new photo in PETRONAS LUBRICANTS & OILS - DIESEL ENGINE OIL
Aug 31, 2020 at 10:27 am —
PETRONAS URANIA 3000 15W‑40 DIESEL ENGINE OIL

PETRONAS URANIA 3000 15W‑40 DIESEL ENGINE OIL

PETRONAS Urania 3000 15W-40 ==> formulated with ViscGuard™ to effectively guard against engine silent killers (engine deposits: soots, ash, deposits and varnish), preventing abrasive wear and oxidation to maintain optimal oil viscosity. This helps in extending engine life and reduces the total cost of ownership. PETRONAS Urania 3000 15W-40 is suitable for heavy duty diesel applications including modern, high-output, low emission engines fitted with emission control systems using SCR and EGR technologies. It is also suitable for new and old turbocharged and naturally aspirated diesel engines, both on-highway and off-highway, running on high or ultra-low sulphur diesel and bio-diesel. Note: Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle. FEATURES & BENEFITS Main Benefit(s): Maintains oil at optimal viscosity levels, delivering optimal lubrication to prevent unplanned breakdowns. Also delivers: Excellent control in deposit build ups, delivering optimum fleet's engine performance. Effectively combats high concentration of soot build ups, critical to prevent loss of vehicle horsepower. Reduces acidic levels leads to corrosion, making your fleet engines more durable and longer life. read more
Aerochem Industries Sdn Bhd added new photo in KOSSAN MARINE COATING PRODUCTS - FILLER & PUTTY
Aug 30, 2020 at 11:18 am —
KOSSAN KOFIL FILLER

KOSSAN KOFIL FILLER

KOSSAN KOFIL  EPOXY RESIN FILLER ==> a non-shrinking, waterproof Epoxy resin based filler which, when cured, adheres strongly to clean surfaces of wood, metal, stone, concrete, ceramics, and most plastics. KOFIL should be used for all Marine construction and repair work and for filling inequalities before sinking with Fibreglass read more
Aerochem Industries Sdn Bhd added new photo in KOSSAN MARINE COATING PRODUCTS - ADHESIVE
Aug 30, 2020 at 10:54 am —
KOSSANGLUE 2-PART ADHESIVE

KOSSANGLUE 2-PART ADHESIVE

KOSSAN GLUE ( 2-PART GLUE ADHESIVE ) ==> specially formulated for specialised use in the MARINE and CONSTRUCTION industries. It has excellent adhesion and strength. Use to bond WOOD, CONCRETE, CERAMICS, PLASTICS and OTHER SURFACES. Caution: Ensure substrate surfaces are DRY BEFORE APPLICATION. MIXING RATIO: 2:1 (PART A : PART B) by volumn. POTLIFE : (100gm 30 celcius) approximately : 30 MINUTES). Fully cure (30 celcius) : 5 DAYS. AVAILABLE PACKAGING : 175GM, 300GM and 1KG. (WHITE +AMBER PASTE) read more
Aerochem Industries Sdn Bhd added new photo in KLUBER LUBRICANTS - GREASES
Aug 30, 2020 at 08:53 am —
STABURAGS NBU 12/300 KP

STABURAGS NBU 12/300 KP

STABURAGS NBU 12/300 KP Article-No: 017062Long-term grease for rolling and plain bearings STABURAGS NBU 12/300 KP ==> a rolling and plain bearing grease based on mineral oil and a barium complex soap thickener. It offers good wear protection and good pressure absorption. STABURAGS NBU 12/300 KP is resistant to water and protects reliably against corrosion. read more
Aerochem Industries Sdn Bhd added new photo in PERMATEX - ABRASIVE
Aug 30, 2020 at 08:47 am —
Permatex® Valve Grinding Compound

Permatex® Valve Grinding Compound

Permatex Valve Grinding Compound ==> an odorless grey paste containing selected abrasive grits dispersed in a waterbase, non-corrosive binder composed of gelling agents, lubricants, preservatives and ethylene glycol. It is a multipurpose compound designed to aid valve grinding operations on automotive, industrial and marine engines. Can be used for lapping and grinding chromium-cobalt, hard-faced seats and discs. Removes burrs, surface defects, gums, carbon deposits and corrosion. Mixes with water to form easy-to-use paste. Combines special grits of various sizes that become finer as the compound is worked. Provides a fine, smooth finish. PRODUCT BENEFITS • Speeds precision fit • Saves labor • Reduces repair costs • Non corrosive, non toxic, non flammable TYPICAL APPLICATIONS • Valve seats • Sharpen reel type lawn mowers • Sharpen cutting tools read more
Aerochem Industries Sdn Bhd added new photo in INTERFLON LUBRICANTS & GREASES - GREASES
Aug 30, 2020 at 08:36 am —
Interflon Fluor Grease 2

Interflon Fluor Grease 2

Highly versatile, clean-room compatible NSF® (Class H-1) fluorinated grease that you can depend on. Offers a unique combination of exceptionally high- and low temperature performance, chemical inertness and high load carrying capacity to satisfy your most difficult lubrication needs. Formulated for ultimate performance in the most exacting grease applications. Clearly significantly reduces wear to increase service life of critical components that operate under extreme circumstances or are hard to re-lubricate and need long life lubrication - with virtually no oil bleed. For the (life-time) lubrication of bearings, chains, slides and other machine parts used in (food-stuff) environments where temperatures range from -30°C to + 270°C and process water, steam, gas, oxygen, hydrocarbons, metal Working fluids, acids, bases and other chemical substances rule out the use of conventional greases. Distinctive Properties and Key Advantages Extends service life and lubricating intervals with up to 6 times Dramatically reduces friction and wear Resists almost every kind of chemical Maintains precision of tooling Does not contain hydrocarbons and silicones Product Application Areas Works under almost any conditions. Applications include the lubrication of bearings, chains, slides and many other components made out of steel, stainless steel, aluminium, copper and most other alloys, ceramics, polymers and most other elastomer materials. read more
Aerochem Industries Sdn Bhd added new photo in VICTOR REINZ SEALANTS - PU SEALANT
Aug 22, 2020 at 12:19 pm —
REINZOPLAST PU SEALING COMPOUND

REINZOPLAST PU SEALING COMPOUND

Permanently plastic, non-hardening PU sealing compound Resistant to temperatures from – 50 °C to + 300 °C Very good fluid resistance No cracking from vibrations Non-hazardous substance Sealing gap ≤ 0.14 mm read more
Aerochem Industries Sdn Bhd added 2 new photos in VICTOR REINZ SEALANTS - SILICONE SEALANT
Aug 22, 2020 at 11:58 am —
RENZOSIL  SILICONE SEALING COMPOUND
REINZOSIL-t Transparent Silicone Sealant
Aerochem Industries Sdn Bhd added new photo in ORELUBE LUBRICANTS & GREASES - GREASES
Aug 19, 2020 at 01:55 pm —
ORELUBE 100% WATERPROOF GREASE - CRIMSON 77

ORELUBE 100% WATERPROOF GREASE - CRIMSON 77

Orelube CRIMSON 77 Red Aluminum complex EP grease fortified with special polymer additives to withstand the heavy impact and pounding that is common to heavy equipment   Being extremely adhesive, it resists throw-off from bearings and fittings   Has a unique combination of properties engineered into one grease providing total protection for industrial, marine, agricultural, mining and construction equipment exposed to adverse conditions – high loads, shock loads, water, dirt, dust, weather and steam   Manufactured using high VI paraffin base oil   Other advantages include superior water resistance, high dropping point, and shear stability read more
Aerochem Industries Sdn Bhd added new photo in CHEMTOOL - GREASES
Aug 19, 2020 at 10:59 am —
CHEMTOOL CHEMTEMP GOLD NON-MELT GREASE

CHEMTOOL CHEMTEMP GOLD NON-MELT GREASE

Chemtemp Gold  ==> a high temperature lubricating Grease made with a non-soap thickener in a heavy paraffinic base fluid. The film strength of the high viscosity base fluid along with extreme pressure and anti wear additives provide excellent protection against heavy loads and high temperature. Chemtemp Gold is none-melt, heavy duty high temperature grease for plain and anti-friction bearings operating at low speed and extreme high temperature. Chemtemp Gold will not soften or bleed at high temperature. Product Specifications NLGI Grade...................................................................................2 Thickener Type.................................................Non-Soap/ Bentone Texture..................................................................... Smooth/Tacky Color ...........................................................................Gold Sparkle Penetration, Worked 60, ASTM D-217................................265-295 Dropping Point, ASTM D-2265................................................ None Rust Text, ASTM D-1743.........................................................1,1,1 Four Ball Wear, Scar Dia., mm, ASTM D-2266 ................... .65 Max Four Ball EP, Weld, Kg, ASTM D-2596......................................250 Working temperature................................................... -12 to 185oC Base Oil Viscosity SUS @ 100oF......................................................4500 Viscosity cst @ 40oC.............................................................900 Viscosity SUS @ 210oF.................................................182-197 Viscosity cst @ 100oC..................................................36.4-39.4 Viscosity Index, Min................................................................80 c:TechData/ read more
next page