Kluberplex HB 98-601 BH is a giant leap in the caster lubrication technology. This semi-synthetic grease is designed to withstand high temperatures and also provide excellent lubrication to the segment roller bearings. Klüberplex HB 98-601 BH with its non-hardening tendency, tends to operate in temperatures exceeding 250 ⁰ C, without any increase in the consistency of the grease. read more

General purpose silicone adhesive/sealant (specified) APPLICATIONS • General industrial sealing and bonding applications • Complies with MIL-A-46106 and FDA 177.2600 FEATURES & BENEFITS • One-component adhesive/sealant • Cures at room temperature when exposed to moisture in the air • Acetoxy cure system • Non-sag, paste consistency • Easy to apply • Cures to a tough, flexible rubber • Good adhesion to many substrates • Stable and flexible from -60°C to +180°C (-76°F to +356°F), with short peaks up to +205°C (401°F) • Black version: stable and flexible from -60°C to +205°C (-76°F to +401°F), with short peaks up to +230°C (446°F) • Excellent dielectric properties • Complies with MIL-A-46106 • Complies with FDA 177.2600 • Available in white, black, clear and read more

Mobilux™ EP 0, 1, 2, 3, 004 and 023 products ==> a high performance family of four general-purpose industrial greases and two special-duty semi-fluid greases. These lithium hydroxystearate greases are formulated to provide extra protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3, with base oil viscosities ISO VG 150 and 320.   Mobilux EP 0, 1, 2 and 3 greases are recommended for most types of industrial applications including heavy-duty applications where high unit pressures or shock loads are present. These greases provide excellent protection against rust and corrosion and resist water wash-out which makes them particularly suitable for equipment where moist or wet conditions are common. Mobilux EP 0 and 1 are suitable for centralised systems. Mobilux EP 2 and 3 are general-purpose greases. The recommended operating temperature range is from -20ºC to 130ºC but they may be used at higher temperatures if the lubrication frequency is increased accordingly.   read more

CRC BRAKLEEN Brake and Parts Cleaner ==> formulated to quickly and safely remove brake fluid, grease, oil and other contaminant from brake linings, pads, drums and callipers. Selected solvents, controlled evaporation, low surface tension and high density ensure superior cleaning and degreasing properties and can even lift and remove oil and grease that has already penetrated linings. Applications Recommended for the cleaning and effective removal of grease and oil from mechanical brake linings, drums, brake shoes, disc brake pads, discs, wedge brakes, springs, callipers, clutches, clutch discs, chains, wire ropes, dies, molds, parts, and bearings. Also idea for flushing away built up dirt, grease and oil that can prevent forklifts and industrial machinery from working efficiently. Ideal for removing grease and contaminates from CV joints and wheel bearings. Features & Benefits Fast Evaporation. Minimizes downtime associated with “clean-in-place” cleaning methods. Residue Free. Prevents harmful buildup and eliminates rinsing or wiping. Non-staining, and non-corrosive. 3600 Valve. Ensures that all usable product is expelled from the can evenly when the can is held and sprayed in the upside-down position. Does not contain CFC 113, Methyl Chloroform, Carbon Tetrachloride or silicones. read more

CRC Extreme Pressure Anti-Seize Engine Assembly Lubricant  (SL3331) ==> a lithium hydroxy strearate-based grease with excellent adherence qualities. Extreme Pressure Anti-Seize Engine Assembly Lubricant adheres to metal surfaces to prevent destructive metal to metal contact. Fortified with Molybdenum disulfide and graphite, it will prevent contact friction, galling and wear on all types of engines and parts during assembly, start-up and break-in periods. Continued use prevents damage caused by extreme conditions, increasing performance and prolonging equipment life.  Applications Recommended for use in the assembly of all mechanical pats. Excellent for lubricating areas of rotation sliding contact, such as cylinders, crank shafts and cam shafts. Also recommended for coating internal engine parts during assembly. Features & Benefits • Prevents Corrosion. Contains anti-rust and anti-wear additives to improve equipment life. • Contains a High Percentage of Moly & Graphite. • High Timken OK Load Rating. Contains extreme pressure additives (EP). • Non Conductive, Non-Corrosive. With proper use, won’t mar or pit equipment surfaces. • Water Resistant. Resists washout to prolong performance. • Reduces Torque & Eliminates Heat Freezing. Minimizes wear on metal-to-metal contact points. • Never Becomes Brittle. Stays soft to ensure protection of parts. • No known ozone depleting chemicals. Offers effective performance while complying with the EPA regulations on the use of ozone depleting chemicals. read more

APPLICATION • Suitable for rolling-element bearings in oven fans, driers, conveyors, clutch release bearings, plastic components FEATURES Low evaporation • High oxidation resistance • Good resistance to water washout • Compatible with many plastics • Wide service temperature range read more