Aerochem Industries Sdn Bhd
28, Jalan Mutiara Emas 5/27,
Taman Mount Austin,
81100 Johor Bahru,
Johor, Malaysia.
+6019-8532209
+607-3649508
+607-3503010

CHEMTOOL CS 980 TAN CALCIUM SULPHONATE GREASE

Previous 2 / 2 Next

CHEMTOOL CS 980 TAN CALCIUM SULPHONATE GREASE GREASES CHEMTOOL MAINTENANCE - REPAIR - OVERHAUL PRODUCTS


CSC 980 TAN
Synthetic super high load, high temperature, high speed, water resistance and corrosion
resistance Calcium Sulfonate Complex grease

CSC 980 TAN is made of totally new and exclusive proprietary CSC blended with 100%
premium synthetic base oil. It has an extreme temperature range service for today’s
demanding requirement. CSC 980 TAN provides excellent extreme pressure (EP) and anti
wear (AW) protection with the thickener’s inherent EP and AW properties. CSC 980 TAN
also provide un-parallel corrosion protection. It will easily out perform the best mineral base
oil greases under similar condition.

CSC 980 TAN’s advance synthetic base oil features superior low temperature fluidity for cold
start-up (-28 deg C) when heavy torque is usually induced on bearings. Viscosity of base oil
remains very stable even at elevated operating temperature (201deg C) due to the high
Viscosity Index of its synthetic base oil. A high Viscosity Index at high operation temperature
also ensures better resistance to shearing. The synthetic base oil provides excellent
resistance against oxidation under harsh environment and degradation due to aging.
CSC 980 TAN has a high thermal stability and low evaporation rate. This allows for intervals
between regressing to be extended to reduce production down time and saves on grease
consumption. It does not harden or “vaporize” at high temperature.
The State-of-The-Art “CSC” thickener (30%) apart from carrying the base oil imparts inherent
EP and AW properties. This enables it to outperform many other premium synthetic greases
that are usually blended with much smaller amount of EP and AW additives. Its high content
(30%) thickener formulation further ensures that hydrodynamic lubrication is achieved at all
time. Other premium grease tends to fail when their EP and AW additives have been
exhausted over extended period of non lubrication. CSC 980 TAN demonstrated very little
change in the consistency of the grease under ASTM D-217 Mechanical Work Stability Test
(refer Chart No. 1, page 2). In short, CSC 980 TAN will not soften due to repetitive shearing
and loading.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Recent Updates
Subscribe Newsletter